MakerFocus Raspberry Pi 4 Battery Pack UPS, V3Plus Expansion Board with 4000mAh Battery, Type-C Interface for RPI 5 4B 3B+ 3B 2B+

MakerFocus Raspberry Pi 4 Battery Pack UPS, RPI Pack Standard(Raspberry Pi Battery, USB Battery Pack Raspberry Pi,) Latest Version V3P Expansion Board Power Supply Type-C for Raspberry 5 4B 3B+ 3B 2B+ Remarks: UPSPack V3P is the latest model of a new generation of Raspberry Pi UPS uninterruptible power supply expansion board released in September 2020. According to previous iterations of V1 and V2 versions, V3P version is currently the most stable UPS power supply solution for Raspberry Pi. Description: Please check the pictures carefully to understand the product differences between UPS V3P version and V2P version. You will like this latest version of UPS charging board. It has a smart switch function, and with a type-c interface, allowing you to easily connect with the Raspberry Pi 4B. Package Including: 1 * Raspberry Pi UPS Pack Latest Version V3P 1 * 3.7V 4000mAh Lithium Battery 1 * Package to install screws 1 * 5pin 2.54mm head

• Support Charge While Discharge: It will not affect the output of UPS power supply when external power outage. Note: If you use UPS to supply power for Raspberry Pi3B/3B+ when it is charging, please ensure that the input power is not lower than 2.5A. Recommended Use: 3V 2.5A power supply
• Two Power Modes: Outdoor portable model and Indoor UPS power Supply mode: 1) As an outdoor portable power supply, the motherboard is powered by a lithium battery. and he maximum external power supply capacity is: 5.1V. 2.5A. 2)As an indoor UPS power supply mode: MicroUSB plugs into a normal 5V 2A power adapter, and the external output interface(USB-A interface) can output a maximum of 5.1V.3A. Battery size: 70mm x 41mm x 9.5mm
• 4+2LED are Designed to Show the Status of Battery Power, Charge or Discharge:1) 4 Battery power LEDs: Used to show the current battery voltage and power. 2)The function of the Power LED is to display whether the UPS is supplying power to the Pi, and the LED is on: it means the output is 5V. LED off: Indicates that there is no voltage at the output. 3) Charge charging indicator LED: When the UPS is externally charged via the TYPE-C USB interface, the Charge LED starts to work
• The UPS has Overcharge and Overcurrent Protection Functions: When the UPS externally outputs about 4A, the UPS will consider the external circuit to be in a short-circuit state and automatically cut off the output. The lithium battery board that comes with the UPS has an overcharge and overdischarge protection board. Prevents the battery from being overcharged and overdischarged when the external circuit is abnormal, thereby reducing the possibility of damage to the battery
• Two Output Modes: In addition to the regular output via the USB port, the V3P output interface adds an LC filter, the ripple is about 20mV under no-load condition, and the ripple is about 50mV when a Pi 4 is connected